Instron Used Equipment

To view the used equipment* for a specific category, make a selection from the Category drop down list.

* -This equipment is not CE Certified.

If you don't find what you are looking for, contact us for information on our legacy products.

Category:

CategoryCatalog #NameDescriptionQtyContact
Chambers3110-543 Push Pull Rod Push/Pull Rod. Type Dm to Df. 165mm (6.5 inch) long1 Contact Instron About Item
Chambers3110-710 Push Pull Rod Push/Pull Rod. Type Om to Of. 322mm (12.7 inch) long.1 Contact Instron About Item
ChambersS1-14338-2 Cooling Module CO2 Cooling Module for tall Mini-Chamber 3119-1131 Contact Instron About Item
Couplings2501-092 Coupling Coupling, Type 1m to Df2 Contact Instron About Item
Couplings2501-094 Tension Coupling Tension Coupling, Type Om (12 mm connection with 6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin). Capacity: 2 kN.1 Contact Instron About Item
Couplings2501-157 Tension Coupling Tension Coupling, Type OOm (6 mm connection with 2.6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin).2 Contact Instron About Item
Couplings2501-160 Rigid Coupling Rigid Coupling. Weigh Beam to Om. 1 Contact Instron About Item
Couplings2501-176 Adapter Adapter, 1 to 1 inch -12 (for 2810-196 Flexure Fixt.)1 Contact Instron About Item
Couplings2501-350 Rigid Coupling Rigid Coupling, Type OOm (6 mm connection with 2.6 mm clevis pin) to Of (12 mm connection with 6 mm clevis pin).1 Contact Instron About Item
Couplings2501-351 Coupling for 2713-006 grips Adaptor set for 2713-006 grips to Instron machines. Includes two Type Om, one Type Dm Adapters.1 Contact Instron About Item
Couplings2810-029 Adapter Adapter, Flexure Fix. 1 inch -12f to top Anvil 1 Contact Instron About Item
ExtensometersLCR-UEX-2603-080 2603-080 Balanced Elastomeric Extensometer for Twin Column Systems (250mm)6 Contact Instron About Item
ExtensometersLCR-UEX-2603-084 2603-084 Balanced Elastomeric Extensometer for Single Column Systems (250mm)4 Contact Instron About Item
ExtensometersLCR-UEX-2630-105 2630-105 25 mm gauge length, +/-10% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-106 2630-106 25mm gauge length 10% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-107 2630-107 25mm gauge length 100% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-108 2630-108 1in gauge length, 10% travel (Static)3 Contact Instron About Item
ExtensometersLCR-UEX-2630-109 2630-109 Strain Gauge Extensometer, 1 in gauge length, +50%, -10% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-110 2630-110 Strain Gauge Extensometer, 1 in gauge length, +100%, -10% travel (Static)3 Contact Instron About Item
ExtensometersLCR-UEX-2630-117 2630-117 Strain Gauge Extensometer, 80 mm gauge length, +10% -1% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2640-010 2640-010 25mm guage length 10mm travel (Averaging extensometer for "r" value of sheet metal)2 Contact Instron About Item
ExtensometersU380 B3M Reconditioned Model B3M extensometer 1 Contact Instron About Item
ExtensometersU383 PS6M Reconditioned Model PS6M 1 Contact Instron About Item
ExtensometersU384 T2M Reconditioned Model T2M Extensometer 1 Contact Instron About Item
ExtensometersU385 PSH8MS Reconditioned Model PSH8MS Separable, Non-Averaging Extensometer Measuring Unit1 Contact Instron About Item
ExtensometersU386 PD1M Reconditioned Model PD1M Deflectometer 1 Contact Instron About Item
Faces2702-007 Faces Faces, Smooth Ground. 50 mm wide x 25 mm high (2 x 1 in.). Set of 4 faces. For 2710-001, 101, 102, 2712-002, 014, 019, and 2732-001, 006 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-014 Faces, Smooth Ground Faces, Smooth Ground. 25 mm wide x 38 mm high (1.0 x 1.5 in.) . Set of 4 faces. For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-016 Faces Serrated faces. 1.5 x 1 inch Used with grips 2712-003, 2712-004, 2712-015, 2712-016, 2732-003, 2732-004 C Style2 Contact Instron About Item
Faces2702-017 Faces Faces, Smooth Ground. 50 mm wide x 38 mm high (2 x 1-1/2 in.) For 2712-003, 2732-003, 2712-004, 2732-004, 2712-015, 2712-016 Pneumatic Side Action Grips, and 2710-002, S1-15455 Screw Action Grips. Set of 4 faces.1 Contact Instron About Item
Faces2702-020 Faces Line Contact, Smooth Ground Flat Faces 25 mm (1 in wide). For 2712-003, 2732-003, 2712-004, 2732-004, 2712-015, 2712-016 Pneumatic Side Action Grips, and 2710-002, S1-15455 Screw Action Grips. Set of 4 faces.1 Contact Instron About Item
Faces2702-031 Faces, Smooth Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in.) . Set of 4 faces. For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-033 Faces, Serrated. 25 mm wide x 25 mm high Faces, Serrated. 25 mm wide x 25 mm high (1 x 1 in.) Set of 4 faces. For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-034 Faces Faces, Smooth Ground. 75 mm wide x 25 mm high (3 x 1 in.) For 2712-003, 2732-003, 2712-004, 2732-004, 2712-015, 2712-016 Pneumatic Side Action Grips, and 2710-002, S1-15455 Screw Action Grips. Set of 4 faces.1 Contact Instron About Item
Faces2702-042 Faces Hi temp faces. 1 x 1 inch. Used with grips 2712-002, 2732-001, 2710-001 B Style2 Contact Instron About Item
Faces2702-104 Faces Rubber faces. 6 x 2 inch Use with grips 2712-017, 2712-0121 Contact Instron About Item
Faces2702-106 Faces, Smooth Faces, Smooth Ground. 25 mm x 25 mm (1 x 1 in). Specimen thickness: 0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces.1 Contact Instron About Item
Faces2702-130 Faces Faces, Smooth 1X1in For 2710-0041 Contact Instron About Item
Faces2702-140 Faces Jaw faces, smooth-ground, 50 mm wide x 30 mm high (2.0 in x 1.2 in). For specimens up to 15 mm (0.6 in) thickness. For 2710-203, 2710-204, 2710-205 grips.1 Contact Instron About Item
Faces2703-001 Faces Faces, Flat Serrated. 25 mm (1 in.) wide. Flat specimen thickness range: 0 to 6 mm ( 0-1/4 in.) 16 teeth per inch. For 2716-002 and 2736-002 Wedge Action Grips..1 Contact Instron About Item
Faces2703-071 Faces Threaded faces. 16T per inch 16mm to 19mm(0.625 to 0.75 inch) opening Used with grips 2716-002, 2736-0021 Contact Instron About Item
Faces2703-171 Faces Serrated faces. 25mm Use with grips 2716-016, 2716-0171 Contact Instron About Item
Faces2703-555 Faces Serrated faces. 100mm wide 25 to 32mm (1.0 to 1.25inch) opening Used with grips 2742-5241 Contact Instron About Item
Faces2703-720 Faces Serrated faces. 100mm wide 0 to 9mm (0 to 0.35inch) opening Used with grips 2716-2031 Contact Instron About Item
Faces2703-721 Faces Serrated faces. 100mm wide 8 to 18mm (0.3 to 0.7inch) opening Used with grips 2716-2031 Contact Instron About Item
Fixtures2505-022 Compression Anti Buckling Compression Anti-Buckling Fixture. Boeing / D 695 / D 3846 Stainless steel construction supplied with two precision ground anti-buckling side plates, one plate with a 12mm (0.5 in) clearance to allow strain gage accessibility, four clamping bolts and nuts, and support jig. To be used between two compression platens, 50mm (2 inch) minimum diameter. Not Included. Supplied with a storage case.1 Contact Instron About Item
Fixtures2505-029 Interlaminar Shear Fixture Flexural and Interlaminar Shear Fixture with three point loading head. Minimum span: .4 in. Maximum span: 7 in. Load capacity: 1000 lb. Double bearing shaft alignment. Contains one standard support and nose diameter. Sits on base plate or platen at least 6 in diameter. Upper fitting connection: Type O (12 mm connection with 6 mm clevis pin). For ASTM D790 and D2344. Includes storage case. INcludes A2,B2 (1/8 inch diameter anvils)1 Contact Instron About Item
Fixtures2506-294B1 3 Point loading head 3 Point Loading Head, for 2505-029 with 1/16 inch diameter nose.1 Contact Instron About Item
Fixtures2506-295A3 Specimen Support anvils Specimen Supports for 2505-029 with 1/4 inch diameter nose.1 Contact Instron About Item
Fixtures2810-400A1 Flexure Fixture Flexure Fixture, 3-Point Bend, Capacity: 5 kN (1000 lb, 500 kg). Maximum Span: 194 mm (7.64 in). Minimum Span (4 mm anvil): 4 mm (0.16 in) Minimum Span (10 mm anvil): 10 mm (0.39 in) Temperature Range: -100 °C to +350 °C Upper fitting: Type Om (12 mm connection with 6 mm clevis pin). Lower: Type Dm (1.25 in connection with 1/2 in clevis pin). Upper Anvil: 10 mm diameter. Lower anvil supplied, 2810-400A1(10 mm)1 Contact Instron About Item
Fixtures2810-400A2 Flexure Fixture Flexure Fixture, 3-Point Bend, Capacity: 5 kN (1000 lb, 500 kg). Maximum Span: 194 mm (7.64 in). Minimum Span (4 mm anvil): 4 mm (0.16 in) Minimum Span (10 mm anvil): 10 mm (0.39 in) Temperature Range: -100 °C to +350 °C Upper fitting: Type Om (12 mm connection with 6 mm clevis pin). Lower: Type Dm (1.25 in connection with 1/2 in clevis pin). Upper Anvil: 10 mm diameter. Lower Support Anvils, diameter: 2810-400A1 (4 mm) 1 Contact Instron About Item
Fixtures2830-003 Back Extrusion Food Cell Back Extrusion Food Cell. Includes 2830-035 (type O) and 2830-004 (base plate)1 Contact Instron About Item
FixturesPR10754-8 Dies Shear fixture Die Shear fixture with 10 mm. 1 kN Capacity1 Contact Instron About Item
Grips2701-065 Automatic Pneumatic Air Kit Automatic Air Control Kit for all 3300, 4400, 5500, and 5800 series systems (excluding Model 4411), all 4400/5500 UPDATE Retrofits (excluding 1130 to 1133 Series, 4500 Series, and 6000 Series). Includes electric, foot-operated switch, solenoid valves, air hoses and extra length air cable. Supports automatic pretension grip control.1 Contact Instron About Item
Grips2710-106 Advanced Screw Side Action Grips Advanced Screw Side-Action Grips. Capacity: 10 kN (1000 Kgf, 2250 lbf). Temperature Range: -70 °C to +125 °C (-94 °F to +257 °F) Upper fitting: Type Om (12 mm connection with 6 mm clevis pin) Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin) Features: - Dual screw actuation with graduated cylinders - Snap-on jaw face mechanism with self-alignment - Wide opening suitable for specimen thicknesses up to 30 mm (1.2 in) Requires jaw faces1 Contact Instron About Item
Grips2712-002 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 250 N (50 lb, 25 kg). Temperature range: -29 °C to 80 °C (-20 °F to 176 °F). Maximum specimen thickness: *3.175 mm (0.125 in) *Reduced by 0.9 mm (0.036 in) with rubber coated faces. Upper fitting: Type Bm (1/2 in connection with 3/16 in clevis pin). Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin). Equiped with manual air switch. Requires faces and an Air Distribution Kit. An Automatic Air Control Kit or Footswitch is recommended.1 Contact Instron About Item
Grips2712-004 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 1 kN (200 lb, 100 kg). Temperature range: -29 °C to 80 °C (-20 °F to 176 °F). Maximum specimen thickness: *12.7 mm (0.5 in) *Reduced by 1.6 mm (0.062 in) with rubber coated faces. Upper fitting: Type Cm (5/8 in connection with 1/4 in clevis pin). Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin). Equipped with manual air switch. Requires faces and an Air Distribution Kit. An Automatic Air Control Kit or Footswitch is recommended.1 Contact Instron About Item
Grips2712-013 Pneumatic Side Action Grips Pneumatic Side Action Grips. 5N1 Contact Instron About Item
Grips2712-016 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 2 kN (400 lb, 200 kg). Maximum specimen thickness: *12 mm (0.5 in) *Reduced by 1.6 mm (0.062 in) with rubber coated faces. Upper fitting: Type Cm (5/8 in connection with 1/4 in clevis pin). Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin). Requires faces and an Automatic Air Control Kit or Footswitch.2 Contact Instron About Item
Grips2712-020 Pneumatic Action Grips Pneumatic Side Action Grips. Capacity: 1 kN (200 lb, 100 kg). Temperature range: -29 °C to 80 °C (-20 °F to 176 °F). Maximum specimen thickness: *6.35 mm (0.25 in) *Reduced by 1.6 mm (0.062 in) with rubber coated faces. Upper and lower fittings: Type Om (12 mm connection with 6 mm clevis pin). Equipped with manual air switch and check nuts. Requires faces and an Air Distribution Kit. An Automatic Air Control Kit or Footswitch is recommended. Maximum face height: 38 mm (1.5 in)1 Contact Instron About Item
Grips2712-101 Micro Electronic grips Mini-Grips for micro-electronics1 Contact Instron About Item
Grips2713-003 Roller Grips Self Tightening Roller Grips. 1kN1 Contact Instron About Item
Grips2715-001 Capstan grips Cord Capstan grips. 2.5kN1 Contact Instron About Item
Grips2716-002 Wedge Action grips Wedge Action Grips, Capacity: 100 kN (20,000 lb, 10,000 kg). Maximum specimen size is face determined. Temperature Range: -73 °C to 250 °C (-100 °F to 480 °F) Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin). Requires 25 mm wide (1 in.) faces. Removable handles.1 Contact Instron About Item
Grips2716-015 Wedge Action Grips Wedge Action Grips, Capacity: 30 kN (6,700 lb, 3,000 kg). Temperature range: -70 °C to 250 °C (-100 °F to 480 °F). Maximum specimen size is face determined. Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin). Requires faces.1 Contact Instron About Item
Grips2716-110 Wedge Grip, Pneumatic Pneumatic Wedge Action Grips. Capacity: 100 kN (20,000 lb, 10,000 kg). Upper fitting: Type 1m (34 mm connection with 16 mm clevis pin). Lower fitting: (4) M16 x 150. Maximum specimen thickness: 40 mm (flat). Maximum specimen width: 75 mm (flat). Maximum specimen diameter: 50 mm (round). Clamping length: 70 mm. Temperature range: ambient only. Requires faces and an Air Distribution Kit. An Automatic Air Control Kit or Footswitch is recommended.1 Contact Instron About Item
Grips2732-004 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 1 kN (200 lb, 100 kg). Temperature range: -73 °C to 316 °C (-100 °F to 600 °F). Maximum specimen thickness: *12.7 mm (0.5 in) *Reduced by 1.6 mm (0.062 in) with rubber coated faces. Upper and lower fittings: Pneumatic connection. Requires faces, pneumatic pullrods and an Automatic Air Control Kit or Pneumatic Foot Switch. Sell only for above ambient temperatures2 Contact Instron About Item
Grips2734-004 Pneumatic Cord Yarn Pneumatic Cord & Yarn. High Temp. 1kN Requires Pneumatic Pull Rods2 Contact Instron About Item
Load CellsLCR-UEX-2525-801 2525-801 100kN Drop Through Static2 Contact Instron About Item
Load CellsLCR-UEX-2525-802 2525-802 50kN Drop Through Static1 Contact Instron About Item
Load CellsLCR-UEX-2525-815 2525-815 2.5 N Drop Through Static4 Contact Instron About Item
Load CellsLCR-UEX-2530-439 2530-439 5 N Low Profile Static2 Contact Instron About Item
Load CellsLCR-ULC-2519-101 2519-101 10N S-Beam Static5 Contact Instron About Item
Load CellsLCR-ULC-2519-102 2519-102 50N S-Beam Static7 Contact Instron About Item
Load CellsLCR-ULC-2519-103 2519-103 100N S-Beam Static11 Contact Instron About Item
Load CellsLCR-ULC-2519-104 2519-104 500N S-Beam Static12 Contact Instron About Item
Load CellsLCR-ULC-2519-105 2519-105 1kN S-Beam Static7 Contact Instron About Item
Load CellsLCR-ULC-2519-107 2519-107 5kN S-Beam Static12 Contact Instron About Item
Load CellsLCR-ULC-2525-804 2525-804 10kN Drop Through Static6 Contact Instron About Item
Load CellsLCR-ULC-2525-808 2525-808 10N Drop Through Static4 Contact Instron About Item
Load CellsLCR-ULC-2525-816 2525-816 500N Drop Through Static3 Contact Instron About Item
Load CellsLCR-ULC-2525-817 2525-817 50N Drop Through Static4 Contact Instron About Item
Load CellsLCR-ULC-2527-100 2527-100 50kN Sandwich Style Dynamic (Dynacell)1 Contact Instron About Item
Load CellsLCR-ULC-2527-130 2527-130 1kN Sandwich Style Dynamic (Dynacell)1 Contact Instron About Item
Load CellsLCR-ULC-2530-405 2530-405 5kN Low Profile Static6 Contact Instron About Item
Load CellsLCR-ULC-2530-416 2530-416 500N Low Profile Static3 Contact Instron About Item
Load CellsLCR-ULC-2530-418 2530-418 2kN Low Profile Static4 Contact Instron About Item
Load CellsLCR-ULC-2530-427 2530-427 100N Low Profile Static7 Contact Instron About Item
Load CellsLCR-ULC-2530-428 2530-428 10N Low Profile Static3 Contact Instron About Item
Load CellsLCR-ULC-2530-437 2530-437 50N Low Profile Static4 Contact Instron About Item
Load CellsLCR-ULC-2530-443 2530-443 10kN Low Profile Static1 Contact Instron About Item
Load CellsLCR-ULC-2530-444 2503-444 30kN Low Profile Static2 Contact Instron About Item
Load CellsLCR-ULC-2530-445 2530-445 50kN Low Profile Static5 Contact Instron About Item
Machines1122 1122 Reconditioned Instron Model 1122 Electromechanical Test System. Capacity of 1,125 lbs. (5 kN) with 5500 electronics, load cell and load cell adaptor. 2 Contact Instron About Item
Machines1123 1123 Reconditioned Instron Model 1123 Electromechanical Test System. Capacity of 5000 lbs. (25 kN) with 5500 electronics, load cell and load cell adaptor. 1 Contact Instron About Item
Machines1125 1125 Reconditioned Instron Model 1125 Electromechanical Test System. Capacity of 20,000 lbs. (100 kN) with 5500 electronics, load cell and load cell adaptor.1 Contact Instron About Item
Machines4201 4201 Reconditioned Instron Model 4201 Table Top Electromechanical Test System. Capacity of 1,125 lbs. (5 kN) with 5500 electronics, load cell and load cell adaptor. 3 Contact Instron About Item
Machines4202 4202 Reconditioned Instron Model 4202 Table Top Electromechanical Test System. Capacity of 2,250 Lbs (10kN) with 5500 electronics, load cell and load cell adaptor. 2 Contact Instron About Item
Machines4204 4204 Reconditioned Instron Model 4204 Floor Model Electromechanical Test System. Capacity of 11,250 lbs. (50 kN) with 5500 electronics, load cell and load cell adaptor. 1 Contact Instron About Item
Machines55MT1 55MT1 Reconditioned 55MT1 Torsion testing system. Max Capacity: 200 in-lbs 1 Contact Instron About Item
Platens2501-081 Platen Compression Platen. 150kN 127 mm (5 inch) diameter. Type 1 1/2-12 inch RHm connection. 1 platen-No Flats1 Contact Instron About Item
Platens2501-084 Platen Compression Anvil, 150 mm (6 in) Diameter. Type 1 (34 mm connection with 16 mm clevis pin). Capacity: 100 kN. Does not have flat for LVDT mounting.1 Contact Instron About Item
Platens2501-085 Platen Compression Anvil, 150 mm (6 in) Diameter. Type O (12 mm connection with 6 mm clevis pin). Capacity: 10 kN. Includes LVDT Mounting Holes.1 Contact Instron About Item
Platens2501-096 Spherical Seat Spherical Seat1 Contact Instron About Item
Platens2501-106 Platen Compression Platen. 10kN 127 mm (5 inch) diameter. 129 sq cm (20 sq inch) Type O connection.1 Contact Instron About Item
Platens2501-107 Platen Compression Platen. 50N 13 sq cm (2 sq inch) 40.6mm (1.6 inch) diameter. Type Om connection1 Contact Instron About Item
Platens2840-112 Platen Fatigue Rated Spherical Seat, Capacity 500kN (110 kip) Static / 250kN (56 kip) Dynamic. - For Use With 2840-118,-119 Or -110 Platens - Includes adaptor to M30 x 2 right hand or M48 x 2 right hand compression platen - Mechanical interface: M48 x 2 right hand female thread Quantity: 1 seat1 Contact Instron About Item
TupsLCR-UTUP-8496-01 8496-1 5k tup (equivelent to catalog number 7900-132)1 Contact Instron About Item
TupsLCR-UTUP-8691-00 8691-1 50k tup (equivelent to catalog number 7900-135)2 Contact Instron About Item
Related Information
Contact Us:
  1. Call Instron
  2. Sales Request